How To Get The Most Out Of Your CJC 1295 DAC

Over the course of this section, we’re going to outline the most appropriate dosage procedures, cycles and nutritional guidelines to ensure that you’re able to get the most out of CJC 1295 DAC.

By following all of the information contained within this section, you’re sure to have a positive time over the course of your cycle.

Recommended CJC 1295 DAC Doses

We’ll now discuss the relevant doses for you to implement when utilising CJC 1295 DAC. Before we provide an overview of goal specific doses, we’re first going to explain a couple of relevant dosage principles in regards to this product.

The Saturation Dose

Though some peptides (ipamorelin) are an exception to this rule, almost all peptide varieties have an inbuilt “saturation” dose that, when surpassed, provides no surplus benefit to the user.

Anabolic steroids are actually similar in that many of them will not be any more effective for being taken in excessive doses when compared to maximum “upper case” lower level intakes (trenbolone for instance hasn’t been shown to have any greater effect on average when taken in 1,000 mg measurements compared to 400 – 500 mg measurements.)

What can potentially occur when the dose is dramatically increased however are more side effects, presented in a more potent fashion than they would be with a “sensible” and functionally useful intake.

Luckily, there is much less “guess work” involved with peptides, and we have an accessible and safe means of gauging when we are having “too much” as opposed to anabolic steroids that tend to be more “open ended” and open to risky interpretation.

Peptides should be taken (unless stated otherwise) at a ratio of 1 mcg per kg of bodyweight for a maximally effective, safe dose.

It’s theorised that doubling the amount listed here would potentially yield only a 50% efficiency increase, and adding a further 100 mcg would yield a final 25% increase before any surplus benefit entirely disappears with further dose increases.

Please note that this latter statement is a theory only, and is not currently supported by scientific evidence. Sticking with the saturation dose is still by far the best means of guaranteeing safety in conjunction with optimal efficiency.

It’s actually with this latter theory in mind that many bodybuilders choose to surpass their “saturation” dose.

Due to the product only needing to be integrated every 3 – 4 days or once per week, many aesthetically minded individuals will try to “make up” for the dosage on the missed days I.E injecting 700 mcg to cater for all seven days of a cycle week when injecting once per week.

In regards to whether or not this is effective; it’s hard to scientifically support this concept.

What it’s important to remember is that CJC 1295 may last for up to 8 days in the system, but regardless of the quantity in mcg of the product ingested per injection, it’s active life is likely going to start “falling off” within 3 – 4 days at the most.

This means that even when ingested at an intake of 700 mcg; the same principle will still apply and it’s potency will begin to drop off and diminish.

Whether or not the higher intake would result in a higher “minimum” potency level over the course of the week is debatable (for instance 100mcg after three to four days in the body could potentially yield much less effect than a “dropped potency” 700 mcg dose which could theoretically maintain a higher growth hormone “baseline” until the next injection.)

At this stage, it’s all purely speculation without stringently controlled scientific test results to back either theory, but the one constant you can rely on is that dosing at an intake of 1mcg per kg of body weight either every 3-4 days or 7 days is going to be the best means of guaranteeing safety and lack of waste.

You may wish to experiment with higher doses, but you need to be aware that side effect potential will likely increase in the process, though your results could possibly be enhanced at least in regards to anabolic capacity / fat burning.

Ordinarily speaking (with most other peptide varieties) exceeding the saturation dose will not yield excess benefit.

Flexible Cycling

Rather than being a type of cycle, what this term ultimately means is that CJC 1295 DAC provides the perfect foundation to allow for flexible cycle building.

You can combine this product with all GHRP types as well as “specialist” peptides designed to achieve niche goals like melanotan and frag 176 – 191.

On top of that, you can actually combine peptides like this whilst simultaneously utilising anabolic steroid varieties – this is true regardless of whether you are performing a bulking or cutting phase.

Growth hormone and its many secretagogue “siblings” are potentially the most diverse anabolic products on the market, being dexterous enough to fit into almost any regime imaginable.

You should consider using CJC 1295 in conjunction with a GHRP product (though as we’ll soon outline, unique dosage principles may apply in this instance) as a means of enhancing general anabolism / fat burning as part of a wider stack containing steroid hormones if you are looking to achieve the highest level of anabolism possible.

Even those who wish to combat aging and speed up injury recovery have the option of using this product as an “underpinning” agent on which to develop further benefit via the integration of other compounds.

This “accessibility” is one of the primary reasons behind the success of growth hormone secretagogues in general.

Doses For Bodybuilding / Fat Burning

As previously outlined, sticking with the saturation dose (1mcg per kg of bodyweight) is the most appropriate means of guaranteeing safety and efficiency whilst using CJC 1295.

With that said, you may wish to (at your own risk) experiment with higher doses of anywhere between 600 mcg to 1,000 mcg per week (split into two separate doses administered every 3 – 4 days if you wish) in the pursuit of advanced results.

Please note that the risk of side effects manifesting will be much higher when implementing higher doses like this.

Doses For Anti Aging

There is little to no need to surpass the saturation dose every 7 days in order to achieve anti-aging benefits with CJC 1295.

At the most, you may wish to administer the saturation dose every 3 – 4 days to guarantee optimum product presence. It should be noted that 50% of the saturation dose would likely yield enough positive benefit to justify running CJC 1295 at this minimal level.

As per the bodybuilding / fat loss guidelines; how much you choose to implement is up to you, though the “half-dose” mentioned above will likely be enough for most members of the general public.

Doses For Injury Recovery

For those who wish to implement CJC 1295 for injury recovery, they should consider gauging initial effectiveness with an intake of 50% of the saturation dose every 7 days.

Should symptoms not improve, try upping the dose frequency to every 3 – 4 days, followed by an increase in dose quantity to the full saturation dose within the (initially) 7 day and every 3 – 4 day time scales respectively should this former principle not prove to be effective enough.

Combining CJC 1295 With GHRP Products

As you’re no doubt well aware from reading through this profile so far, all growth hormone releasing hormone varieties are at their best when combined with growth hormone releasing peptides (GHRP’s.)

We’re now going to take you through some of the most popular GHRP and GHRH cycles so that there’s no confusion in regards to how to successfully combine them, allowing you to get the most out of your CJC 1295 from day one.

Initially, we’ll first assess an important principle in regards to safely administering the two secretagogue varieties at once.

A Quick Note On Dosage Potency

Though this element of dosing is somewhat open to interpretation and experience, it’s fair to say that novice users of either GHRP or GHRH (or both) will need to implement their product at half the normal rate they would when using them in isolation.

For instance, a 100 kg male user would normally ingest (should he be adhering to the saturation dose) 100mcg of either product should they be used alone, but in a combined scenario, he would instead implement 50 mcg of each.

This is because the two products “boost” each other to the extent that any surplus dose (to the 50% level mentioned here) is not necessarily required to achieve maximum benefit.

Those with more experience will doubtless integrate the saturation dose and beyond owing to their higher level of tolerance, but this does not necessarily mean that they will achieve surplus benefit.

Though this element of dosing is somewhat open to interpretation and experience, it’s fair to say that novice users of either GHRP or GHRH (or both) will need to implement their product at half the normal rate they would when using them in isolation.

For instance, a 100 kg male user would normally ingest (should he be adhering to the saturation dose) 100mcg of either product should they be used alone, but in a combined scenario, he would instead implement 50 mcg of each.

This is because the two products “boost” each other to the extent that any surplus dose (to the 50% level mentioned here) is not necessarily required to achieve maximum benefit.

Those with more experience will doubtless integrate the saturation dose and beyond owing to their higher level of tolerance, but this does not necessarily mean that they will achieve surplus benefit.

Ultimately, whether or not surpassing the saturation dose in a combined scenario achieves excess results will depend on the users genetics and hands-on experience with the peptides being used.

CJC 1295 DAC And GHRP 6 Cycle

This popular cycle will prove to be highly effective for those who wish to develop enhanced muscle mass provided their dietary intake and training principles are in check.

Please observe the following table to see how to effectively combine these two items – this table assumes that the user weighs 100 kg and chooses to match the theorised saturation dose necessary for a combined peptide cycle with CJC 1295 and implement it based on 50 mcg per day (rather than 100 as per isolated use) for each day of the week.

Week CJC 1295 GHRP 6
1 – 16 1 x per week a 350 mcg (50 mcg per day equivalent) per injection 3 x per day at 50mcg per injection

Again, please note that the CJC 1295 dose stated here can be increased at the user’s own risk in the pursuit of enhanced anabolism.

CJC 1295 DAC And GHRP 2 Cycle

This will be an excellent cycle for anyone who wishes to accelerate fat burning results and would form the perfect basis to a cutting phase.

Your intake levels are going to be precisely the same as they are when utilising GHRP6 and CJC 1295 as follows:

Week CJC 1295 GHRP 2
1 – 16 1 x per week at 350 mcg (50 mcg per day equivalent) per injection 3 x per day at 50mcg per injection
The same information as previously outlined in regards to increasing your dose still applies here if you wish to try and accelerate fat loss.

CJC 1295 And Ipamorelin Cycle

This cycle will be beneficial for anyone wishing to either improve their anabolic capacity, burn body fat or both.

Ipamorelin is the only “selective” secretagogue (you can find out more information on this peptide on its separate profile page) meaning that the more you implement, the more theoretical benefit you’ll achieve in the process.

Being that this makes dosing with this product a fairly open ended concept, we’ll simply base the following cycle on double the “normal” GHRP dose – it’s then up to you how closely you stick to the specified guidelines.

Week CJC 1295 Ipamorelin
1 – 16 1 x per week at 350 mcg (50 mcg per day equivalent) per injection 3 x per day at 100mcg per injection

It’s worth noting that this “selectivity” with ipamorelin may not come without a price. More information regarding ipamorelin side effects can be found on its separate profile as previously outlined.

Tapering Off Doses

Some users like to “taper” off their doses of CJC 1295 in order to ensure that a state of internal “homeostasis” can be restored effectively within the body.

This principle makes sense, being that the presence of an exogenous compound may lead to the body coming to “rely” on CJC 1295 as its primary means of growth hormone production, thus ceasing or diminishing its organic production capabilities.

There is currently no concrete evidence to prove that this is indeed the case, but those who wish to take the precautionary step of tapering off their intake should (immediately following their last full dose) integrate CJC 1295 as follows (based on a 100kg user performing an isolated cycle):

Week CJC 1295
1 75 mcg per week
2 50 mcg per week
3 25 mcg per week

Following the final week, all use would cease.

But What About CJC Without DAC?

Don’t worry – using CJC without the drug affinity complex attached is actually far, far simpler than it is with it present.

In regards to dosing, you’ll simply need to administer CJC w/o DAC in the same intervals as your GHRP injections, and at the same intake level.

For instance, should you choose to create a growth hormone pulse 3 – 4 times per day whilst using GHRP 6, if you’re a 100kg user, you’ll implement 50mcg three to four times per day in conjunction with 50mcg of CJC 1295 w/o DAC.

An isolated cycle would simply involve adhering to the saturation dose, though you’d still be implementing it with the same frequency (3 – 4 times per day) as a GHRP product.

Provided your doses (the same goes for using GHRP products too) are at least three hours apart, there is no set “law” for how many pulses you can create per day.

It obviously goes without saying that the more pulses you choose to create, the higher your risk of side effects manifesting is.

How To Prepare A CJC 1295 DAC Administration

Using peptides isn’t quite as simple as using many over the counter pharmaceutical products; this is because they arrive in powdered form.

Being that you cannot inject powder directly into the human body, it must first be “reconstructed” using a carrier liquid in the form of bacteriostatic water.

This water is specially formulated to provide a sterile and effective means of rapidly shuttling the peptide powder into the bloodstream, thus allowing it to synergise with the internal organs / nervous system and exert its effects.

In order to perform the reconstitution process, you will need:

A vial of CJC 1295
A pack of sterile alcohol wipes
A vial of bacteriostatic water
An insulin needle

With these items in place, you will then be able to successfully perform the reconstitution process.

Performing The Reconstitution Process

In order to perform the reconstitution process, simply follow these steps:

1.Thoroughly wipe down both the CJC 1295 and the bacteriostatic water vials (after removing the safety caps)

3.Pierce your vial of bacteriostatic water and withdraw 0.5ml per mcg of peptide powder

2.Take your insulin needle out of its packaging

4.Pierce the JC 1295 vial and hold it on a 45 degree angle, then gently drip the water down the side of the vial until it gradually meets with the powder and “melts” it (do not squirt the water directly onto the powder – this step must be performed gently in order to avoid destabilising the product powder as it is highly sensitive)

Once you have successfully followed these steps, you’ll then need to safely store your powder in such a manner that it does not destabilise.

How To Store CJC 1295

It’s crucial that you store your peptide safely in order to ensure that it does not destabilise (thus rendering it useless) whether it is in powdered form or it has already been reconstituted.

In order to do this, please observe the following guidelines:

  • Peptide powder can be stored at room temperature for up to 6 weeks, though it is best stored at – 20 degrees celsius
  • Reconstituted peptide powder (mixed with bacteriostatic water) can only be stored at – 20 degrees celsius

Regardless of which form the peptide is currently in (powdered or reconstituted), it cannot be stored in direct sunlight at any time as this will destroy the product.

How To Inject CJC 1295

In this section, we’re going to discuss the various different injection methods at your disposal in order to safely integrate this product into your system.

Please note that you should always consult with a medical professional in regards to your chosen injection method regardless of any guidelines you have read online (including this one) in order to ensure that you integrate this product safely.

There are three popular modes of injection, as we will now discuss.

Intravenous Injection

Intravenous injection involves directly injecting into the bloodstream (into the veins) with the needle almost completely flat against the body and will allow CJC 1295 to enter the system with immediate effect.

Whilst this method is certainly direct, it is arguably the riskiest of all three without appropriate medical training. You’ll find further guidelines on intravenous injections here.

Intramuscular Injection

This administration method involves directly injecting into a chosen muscle site and allowing the product to “infiltrate” the muscle cells – the needle must be placed at a 90 degree angle to perform this procedure.

It’s worth noting that the most popular IM injection sites are the deltoid, the quadricep (thigh) and the glutes (buttocks.)

To find out more about this method of injection, please observe these guidelines.

Subcutaneous Injection

Subcutaneous or “Sub Q” injections involve directly injecting into the subcutaneous layer of fat beneath the surface of the skin. The needle should be placed on a 45-degree angle in order to safely perform this procedure.

You’ll find further information on how to perform subcutaneous injections here.

Why Subcutaneous Injection Is Preferred

Sub Q injections have become somewhat synonymous with growth hormone administration, leading many to believe that this is the superior method of administration.

There is actually very little, if any evidence to suggest that injecting into the fat layer beneath the surface of the skin will in any way prove more beneficial when compared to the two other popular methods of integration.

What is certain however is that a sub Q injection is arguably going to be both less painful, and less risky than implementing CJC 1295 via any other means.

It’s also worth noting that it is much easier to perform (hence its lowered risk potential) – these factors combine to make sub Q injections a fairly “obvious” choice for many users, rather than them having to go through any unnecessary stress when injecting via either of the other means.

You’ll find a comparison between the IM and sub Q injection types here in relation to growth hormone injections.

There is little reason to compare this injection type to the intravenous injection procedure as it is the least popular, and for obvious reasons is also the riskiest.

On balance, it goes without saying that your product would reach the bloodstream much faster when implementing any product in this latter fashion.

Timing Your Next Meal Appropriately Following Your Injection

Making sure that you time your next meal correctly (in conjunction with precisely what you ingest) is going to prove key to your success with CJC 1295 and all other peptide varieties.

This is because the presence of carbohydrates and fat in the system within the 30-minute window following your injection can interfere with the secretagogues ability to create a growth hormone pulse.

As such, you need to make sure you inject CJC 1295 on an empty stomach, and do not eat any food during the 30 minutes following said injection.

It’s worth noting that a protein shake (zero fat and carb variety mixed with water) shouldn’t prove to be an issue, but if you wish to be entirely on the safe side then it would be best to have nothing until this 30 minute window has elapsed unless you have either just trained, or just woken up (in which case you’ll need to avoid catabolism in either instance.)

Ask Free Advice For Your CJC 1295 DAC Cycle! Click here...
Scroll Up